Home > 1-800-679-8718 > Brand > EP Henry >

Devon Stone


 
Alternative Views:


Quote Pricing
Call 1-800-679-8718



Product Code: EP-HENRY-002
Call for Quote

Description Technical Specs
 
Want the look of Natural Stone? Choose DevonStone, EP Henry's exclusive line of cast stone slabs replicating the looks of bluestone, slate, limestone and more.
Features
  • What are the advantages of DevonStone over natural stone?
    DevonStone is more uniform in thickness and in length and width dimensions,
    making installation faster and easier. Many natural stones also have inherent
    fractures, making them susceptible to cracking and spalling in freeze/thaw conditions.

    My DevonStone cast stone pavers have a white haze on them.
    What is it?
    It’s probably efflorescence. This occurs when the natural salts in the raw materials
    (including sand, cement, and stone) are drawn to the surface by moisture.
    Efflorescence is common to all concrete products, is completely natural and
    will disappear with time.
    While efflorescence will eventually go away, there are cleaners available at thins link that are
    specifically formulated for concrete. Most of these contain acid and detergents, so
    be sure to follow all label directions and environmental regulations if you choose
    to use them. Remember. if you clean the DevonStone pavers, you must seal them.
    I’d like my DevonStone pavement to have a sheen.

    Can I seal it?
    Yes, you can. Sealing will enhance colors and may prevent staining. If you choose
    to seal, do so a minimum of 60 to 90 days after completion of installation.
    Product should be cleaned prior to sealing.

    Can I put DevonStone on top of my existing
    concrete patio or walkway?
    Yes, you can, provided it’s in good shape. Use a high strength, flexible concrete
    adhesive or a thin set bed (1/2” – 3/8”) of mortar to adhere them to the
    concrete slab. All joints must be mortared (polymeric sand is not acceptable in
    these applications). Make sure you immediately clean any mortar residue off the
    pavers, using a damp cloth.

    How do I cut DevonStone?
    DevonStone can be easily cut with any power saw with a diamond blade. Always
    wear protective glasses and a mask when cutting with a power saw. If using water
    during the cutting process, be sure to immediately clean any residue that may be
    left on the stone, or staining will result. Do not use a hammer and chisel to cut
    DevonStone.

    Can I use DevonStone on my driveway?
    No. DevonStone is not suitable for any vehicular application.

    Can I use DevonStone inside?
    Absolutely, just install it the same way you would tile, with a thinset adhesive.

    Can I use DevonStone with my EP Henry pavers?
    You can, but you must account for the difference in thickness. Most pavers are
    2 3/8” or 3 1/8” thick; DevonStone is 1 5/8” thick. Do not attempt to
    compensate for the variability in thickness with the bedding material.

    IMPORTANT NOTE: DO NOT USE A PLATE COMPACTOR ON DEVONSTONE!

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

1-800-679-8718 > Brand > EP Henry
Pavers & Walls > Patio Pavers
Pavers & Walls